Support Topic

Setup Step 1: Prepare the Remote Transmitter

  1. Lift the rubber cover protecting the Charging Jack.
  2. Connect one of the charger connectors to the Charging Jack.
  3. Plug the charger into a standard wall socket.
  4. Charge the Remote Transmitter for 24 hours for the first charge. Recharges take only 12 hours. (Note: The Transmitter Indicator Light will flash after 12 hours of charging. For the first charge, continue to charge the Remote Transmitter for an additional 12 hours.)
  5. When charging is complete, replace the rubber cover.
Products related to this Support Topic:

_en-au