SBC-10R-E- How do I change modes?
- Turn the Receiver off and make sure it’s not flashing.
- Turn the Receiver on by pressing and holding button → the Receiver will show the current display → the LED while light up solid red → continue to hold the button* and the unit will cycle through each of the modes → release the button once the desired mode is lit up to select the mode → Receiver will flash 5 times in the colour of the mode selected, confirming your selection.
- Note: When selecting mode you can also press and release button to get to the next mode instead of holding the button down. *User Selected Mode: When cycling through this mode the Receiver will cycle through all levels 0-9 before moving onto the next mode, Temperament Learning. *If you continue to push the button for more than 5 seconds, you will begin changing modes.
- Modes:
o Green – Temperament Learning Mode
o Blue and Green – Progressive Stimulation
o Blue – User Selected Stimulation. With this mode, you will see the stimulation level number change on the Receiver. Release the button when you get to the number you wish to use.