Support Topic

Once I have added a new collar colour and paired it, how do I get it to show as one of the dogs I'm tracking?

The MY COLLARS screen allows you to configure a new collar, pair the collar to work with your Handheld Device, or share tracking of a collar from another Handheld Device. You can add up to 12 collars to the system.
 

TO ADD A COLLAR:

  1. From the main menu, select SETTINGS > MY COLLARS.
  2. Press the up or down arrow keys to select the colour you want to use with the new collar.
  3. Press the right arrow to open the confi guration window.
  4. To enable the E-collar Module, select and press the right arrow key to set E-COLLAR to Y.
  5. To enable the GPS Collar, select and press the right arrow key to set ACTIVE to Y. If sharing a collar skip Steps 5 and 6 and move to the SHARE COLLARS section below.
  6. Put the new collar in “pairing mode” (see Step 4) by pressing and holding the On / Off buttons on the GPS Collar and E-collar Module until their indicator lights are solid amber.
  7. On the Handheld Device, select PAIR COLLAR to allow the GPS Collar with E-Collar Module to connect to the Handheld Device. This collar is now ready to be put on a dog.

TO SHARE COLLARS:
You can track dogs associated with another Handheld Device. This is helpful if you and another person are working with multiple dogs. NOTE: This feature is for tracking only. You cannot train a shared dog.

  1. On the main menu, select SETTINGS > MY COLLARS > colour > SHARE COLLAR where the colour selected is what you want to use for the collar to be tracked.
  2. Press the right arrow to select Y to enable collar sharing.
  3. To enter a User ID, select ID and press the right arrow.
  4. Use the up or down arrow keys on the Menu Selection Pad to enter the four-digit ID code from the Handheld Device whose dog you want to track. See Status Screen from Main Menu to find the ID Code.
  5. To select a dog number, select DOG and press the right arrow.
  6. Use the up or down arrow keys to enter the two-digit identifier of the specific dog to be tracked. This is the code used by the other user to identify that dog.
  7. When finished, press BACK to return to the main menu.
Products related to this Support Topic:

_en-nl