The collar has to be held on top of the Boundary Wire to activate, or it does not activate at the Boundary at all.
-
Replace the battery.
-
Adjust Range Adjuster knob clockwise to increase the distance from the Boundary Wire that the Collar Receiver activates.
-
Adjust the Range Switch to the other setting.
-
If using a Double Loop, make sure Boundary Wires are separated 1 - 1.5 metres.
-
If the Collar Receiver still has to be held on top of the Boundary Wire, perform the Short Loop Test.
Prodotti correlati a questo argomento:
